Today we look at how to digitally make a 9 Circuit Circular Labyrinth. This method is a draw and cut method, meaning you will be making edits that remove lines you have previously drawn as you move thru the steps. It is possible to use a drawing only method but I think it is much more complicated with many more steps. Let’s get started.
Step 1: Draw 10 Concentric Circles
Draw 10 concentric circles each an equal distance between one another and centered around the middle circle. The middle circle will become the labyrinths goal.
Step 2: Draw the 6 Inner Walls
I could break this into more steps but there are 6 straight lines that form inner walls and pathways. See the example. At 12 o’clock create 2 lines, blocking paths between all circles except 7-8. At 3 o’clock add a pathway wall to block circles between 2 and 8. Use 2 lines to draw a pathway from the center to the bottom edge (notice neither are at 6 o’clock). The right line will stop one circle short of the outer circle. Add a line at 9 o’clock blocking the pathways between circles 2 and 8.
Step 3: Add Pathways Where Needed
Refer to the picture and add pathways where needed, erasing portions of the circles. There are many, and depending on how you draw/erase them the number can change. They are all at 3, 6, 9 and 12 o’ clock.
That completes the drawing of a 9 Circuit Circular Labyrinth. Now I have some news you may find interesting. This is only one possible way of many to build this labyrinth. Check out this post to see how other constructions look and compare.
Other posts that may interest you:
The Top 12 Maze Generation Websites